2007 Ford Pickup
Mileage
151,483
Service Date
2/20/2020
Services Performed
- Perform monitor w/o Waiver
Rick O. gave our service a 5 star review on 2/22/2020
-
-
2012 Ford Pickup
Mileage156,943Service Date2/10/2020Services Performed- Perform monitor
Robert C. gave our service a 5 star review on 2/13/2020 -
2006 Ford Mustang
Mileage88,950Service Date1/10/2020Services Performed- Evacuate and recharge A/C System, Check Belts/Hoses, Check Vent Temperature and Temperature Controls, Check for leaks, Install A/C Dye (Customer to bring back for black light test)
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
- Remove and install long block – consists of cylinder block fitted with pistons, rings, connecting rods, crankshaft and bearings, cylinder heads, camshaft, timing chain or belt, gears and sprockets. Includes clean and transfer fuel and electrical assemblies, engine mounts, manifolds, valve covers, oil pan, timing cover, water pump, clutch assembly and flywheel. Adjust idle speed, timing and valves where applicable
- Verified customers concern, inspection showed knocking noise coming from left front of engine, tear down and inspection showed faulty timing chain cassette on bank 2. plastic and metal debris though out engine, replaced engine with long block assembly, test drove and retest no abnormal noises at this time
- Fuel 3.906 gallon @2.559
- Repair flat Tire
Erik O. gave our service a 5 star review on 1/14/2020 -
2007 Ford Pickup
Mileage150,465Service Date12/9/2019Services Performed- Perform monitor wo /Waiver
Rick O. gave our service a 5 star review on 12/27/2019 -
2011 Ford Edge
Mileage86,720Service Date5/22/2019Services Performed- Remove and re-install four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front (70%) Rear (70%)
Rich M. gave our service a 5 star review on 5/23/2019 -
2012 Ford Expedition
Mileage108,882Service Date2/11/2019Services Performed- Inspected customers original engine and found #2 cylinder valve broken internal engine parts found in intake manifold, unable to remove necessary to replace with new intake manifold. Inspect engine parts provided when vehicle arrived by tow truck**** Install long block – consists of cylinder block fitted with pistons, rings, connecting rods, crankshaft and bearings, cylinder heads, camshaft, timing chain or belt, gears and sprockets. Includes clean and transfer fuel and electrical assemblies, engine mounts, manifolds, valve covers, oil pan, timing cover, water pump, clutch assembly and flywheel. Adjust idle speed, timing and valves where applicable. *******Adjust labor time to account for engine already being removed, additional time needed to repair wiring, re-install bumper facia and inner bumper (Did not need removed for engine replacement) Sort and inventory parts, Found starter bolt cut needed to extract and install Helicoil. Note**Additional Parts needed not usually replaced with engine bid are marked with ****
- Towing
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
- Inspect hoses an clamps. Pressure test cooling system. Power Flush engine, radiator, and heater core. bring Antifreeze to -35* degrees. Add water pump lubricant and cooling system rust and corrosion protectors. Check thermostat and electric cooling fan operation as applicable.
- Evacuate and recharge A/C System, Check Belts/Hoses, Check Vent Temperature and Temperature Controls, Check for leaks, Install A/C Dye (Customer to bring back for black light test)
Chris H. gave our service a 5 star review on 2/16/2019 -
2004 Ford Pickup
Mileage88,740Service Date10/31/2018Services Performed- Remove and install long block – consists of cylinder block fitted with pistons, rings, connecting rods, crankshaft and bearings, cylinder heads, camshaft, timing chain or belt, gears and sprockets. Includes clean and transfer fuel and electrical assemblies, engine mounts, manifolds, valve covers, oil pan, timing cover, water pump, clutch assembly and flywheel. Adjust idle speed, timing and valves where applicable
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
- Inspect hoses an clamps. Pressure test cooling system. Power Flush engine, radiator, and heater core. bring Antifreeze to -35* degrees. Add water pump lubricant and cooling system rust and corrosion protectors. Check thermostat and electric cooling fan operation as applicable.
- Remove and replace fuel filter. Inspect for leaks.
Russ R. gave our service a 5 star review on 11/8/2018 -
2010 Ford Pickup
Mileage105,143Service Date9/26/2018Services Performed- Tested seat operation and found power connecting for backwards and lean back on seat but not forward and lean forward, switches are bad. Remove and replace passenger seat switch. Tested and is working to design.
Phil H. gave our service a 5 star review on 9/27/2018 -
2011 Ford Edge
Mileage82,651Service Date9/24/2018Services Performed- Check charging system for proper output to battery, load test battery, Check all wiring, Inspect belt(s) and adjust as required, Test for current draw on electrical system and record findings, Remove and replace battery.
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Rich M. gave our service a 5 star review on 9/25/2018 -
We Service and Repair
Most Ford Cars and Trucks
Services Performed- All General Repair and Maintenance
