CRM Mitchell1, Author at Al's Car Care

2012 Chevrolet Traverse
Mileage
115,329
Service Date
9/15/2021
Services Performed
Verified customers concern and recommend R&R drivers seat switch. Now part is switched the seat is working to design at present
Armondo L. gave our service a 5 star review on 9/17/2021
2013 Buick Enclave
Mileage
45,280
Service Date
9/8/2021
Services Performed
Pre-purchase inspection–sunset motor–Lois 208-371-5994
ENGINE OIL & FILTER – INSPECT – [Check engine oil level and oil life percentage. Change engine oil and filter, if needed.] OIL LIFE MONITOR – RESET – [Reset the system at every oil and filter change. If the system is ever reset accidentally, the oil must be changed at 3000 miles since the last oil change To reset the Engine Oil Life System: Turn the ignition to ON/RUN with the engine off. Press the DIC menu button on the turn signal lever to enter the Vehicle Information Menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. Press the SET/CLR button to reset the oil life at 100%. Turn the ignition to LOCK/OFF. The system is reset when the CHANGE ENGINE OIL SOON message is off and the REMAINING OIL LIFE 100% message is displayed. If the CHANGE ENGINE OIL message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.] TIRES – ROTATE – [Tires should be rotated every 7500 miles. Check tire pressure, damage and tread depth.] ENGINE OIL & FILTER – INSPECT – [Check engine oil level and oil life percentage. Change engine oil and filter, if needed.] OIL LIFE MONITOR – RESET – [Reset the system at every oil and filter change. If the system is ever reset accidentally, the oil must be changed at 3000 miles since the last oil change To reset the Engine Oil Life System: Turn the ignition to ON/RUN with the engine off. Press the DIC menu button on the turn signal lever to enter the Vehicle Information Menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. Press the SET/CLR button to reset the oil life at 100%. Turn the ignition to LOCK/OFF. The system is reset when the CHANGE ENGINE OIL SOON message is off and the REMAINING OIL LIFE 100% message is displayed. If the CHANGE ENGINE OIL message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.] TIRES – ROTATE – [Tires should be rotated every 7500 miles. Check tire pressure, damage and tread depth.]
Check vehicle suspension, brakes, under carriage, hoses, belts, check for leaks, check cooling system, check engine for electrical problems. No problems found at present. Recommended 60,000 mile services due soon. Transmission fluid due at 50,000
Nichalas O. gave our service a 5 star review on 9/11/2021
2008 Mitsubishi Lancer
Mileage
273,644
Service Date
8/5/2021
Services Performed
Retrieved DTC's P0171 O2 sensor lean bank 1 sensor 1, P0134 O2 Sensor AFR Heated control circuit, P0031 O2 Sensor Heater control circuit low active, Tested and found a bad O2 recommend O2 replacement and test for further issues, Idle issue is the A/C clutch short cycling and a dirty throttle body.
Evacuate and recharge A/C System, Check Belts/Hoses, Check Vent Temperature and Temperature Controls, Check for leaks, Install A/C Dye (Customer to bring back for black light test)
Clean throttle body
Esmeralda C. gave our service a 5 star review on 8/11/2021
2005 Subaru Outback
Mileage
179,421
Service Date
6/30/2021
Services Performed
Tested and found the engine oil level low added 3 QT's of oil and engine has internal damage lifter tick and a rod knock recommend an engine assembly.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Remove and install long block – consists of cylinder block fitted with pistons, rings, connecting rods, crankshaft and bearings, cylinder heads, camshaft, timing chain or belt, gears and sprockets. Includes clean and transfer fuel and electrical assemblies, engine mounts, manifolds, valve covers, oil pan, timing cover, water pump, clutch assembly and flywheel. Adjust idle speed, timing and valves where applicable
Evacuate and recharge A/C System, Check Belts/Hoses, Check Vent Temperature and Temperature Controls, Check for leaks, Install A/C Dye (Customer to bring back for black light test)
Inspect hoses an clamps. Pressure test cooling system. Power Flush engine, radiator, and heater core. bring Antifreeze to -35* degrees. Add water pump lubricant and cooling system rust and corrosion protectors. Check thermostat and electric cooling fan operation as applicable.
Lawrence C. gave our service a 5 star review on 7/15/2021
2019 Nissan Rogue Sport
Mileage
41,298
Service Date
6/17/2021
Services Performed
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
DEALER A/C SERVICE
Inspection found vehicle has 1234 YF Freon-must go to dealer. After dealer service Verify cooling fan in-op-part is on back order.
Chris B. gave our service a 5 star review on 6/19/2021
2005 GMC Sierra
Mileage
168,273
Service Date
5/28/2021
Services Performed
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Chuck G. gave our service a 5 star review on 6/2/2021
2016 Toyota Tundra
Mileage
108,024
Service Date
5/26/2021
Services Performed
install interlock
Trevor S. gave our service a 5 star review on 5/29/2021
2007 Mitsubishi Galant
Mileage
186,209
Service Date
5/21/2021
Services Performed
PERFORM MONITOR
Zach N. gave our service a 5 star review on 5/25/2021
2007 Jeep Wrangler
Mileage
189,118
Service Date
5/3/2021
Services Performed
Includes: Front suspension visual safety check. Adjust front toe. Adjust caster and camber to factory specifications where applicable. Labor does not include installation of adjustment cams to correct alignment.
Remove and Replace Steering Dampener. Note*Missing steering stop (Tire rubs sway bar) Part on Back order
Remove and Replace upper and lower Ball Joints.
steering wheel oscillations – found loose outer tie rod ends and loose ball joints – recommend replacement and retest for additional concerns.
Replace c/v axle u-joints.
Kip L. gave our service a 5 star review on 5/10/2021
2004 Dodge Dakota
Mileage
145,088
Service Date
3/11/2021
Services Performed
Pressure test cooling system, Check pressures, Check for leaks.
Remove and replace NVLD.
Remove and Replace Radiator, and hoses check pressures.
Remove and Replace Thermostat
Retrieved DTC P0442 Evap system medium leak, tested evap system and found the NVLD did not pass multiple test recommend NVLD replacement. Pressure tested cooling system and found the radiator leaking, recommend radiator, hoses thermostat and cap.
Rich M. gave our service a 5 star review on 3/21/2021

CRM Mitchell1

We Service and Repair all CRM Mitchell1 cars