Check and adjust ignition timing. Replace spark plugs. Inspect ignition and fuel system.
Check and inspect suspension components: ball joints, tie rods, idler arms, springs, bushings, and check for accident damage. Remove and replace lower ball joints.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Flush power steering system. Remove and replace power steering pump. Add fresh power steering fluid. Check for leaks. Road test vehicle.
Includes: Front suspension visual safety check. Adjust front toe. Adjust caster and camber to factory specifications where applicable. Labor does not include installation of adjustment cams to correct alignment.
Inspect hoses an clamps. Pressure test cooling system. Power Flush engine, radiator, and heater core. bring Antifreeze to -35* degrees. Add water pump lubricant and cooling system rust and corrosion protectors. Check thermostat and electric cooling fan operation as applicable.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Premium fuel injection cleaning
Remove cover inspect internals and reassemble with new gasket. Install new fluid to proper levels. Road test vehicle for proper operation.
Remove cover. Remove old gasket material, drain old fluid. Inspect internals and reassemble with new gasket. Install new fluid to proper level. Road test vehicle for proper operation.
Serviced as requested.
Steering fluid from system, install flush chemical into steering reservoir, flush steering hoses, steering gear and pump. Remove flush chemical from system and install synthetic power steering fluid, bleed system of air, Road test.
Rich M. gave our service a 5 star review on 11/18/2019
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Barbara S. gave our service a 5 star review on 11/11/2019
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Remove one transmission oil cooler line and attach to power flush machine. Flush System with recommended solvent cleaner and refill with fresh transmission fluid. Inspect for leaks and mount condition. Test drive and recheck system
Scott S. gave our service a 5 star review on 9/13/2019
Check vehicle suspension, brakes, under carriage, hoses, belts, check for leaks found oil leak around tensioner possible cam seal, check cooling system, found radiator and overflow are empty, there is stop leak in radiator. Recommend coolant flush to start. Power steering pump leaks, Transmission and transfer case leaking recommend reseal.
Chad G. gave our service a 5 star review on 9/6/2019
Vehicle came in with a Check Engine Light concern. Scanned for codes found P0496 and P057C. Tested and purge solenoid is flowing when commanded not to, recommend replace solenoid and valve and recheck operation. Brake pedal reads to low at times there is a TSB to update to a new retainer and replace the switch. Remove and replace evap canister purge valve. clear codes and data working to design at present.
Tialisa T. gave our service a 5 star review on 8/27/2019