Check charging system for proper output to battery, load test battery, Check all wiring, Inspect belt(s) and adjust as required, Test for current draw on electrical system and record findings, Remove and replace battery.
Remove and replace alternator
Kip L. gave our service a 5 star review on 7/2/2019
Replace rear brake pad linings and machine rear brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
Replace front brake pad linings and machine front brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
Hope B. gave our service a 5 star review on 5/28/2019
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Teresa C. gave our service a 5 star review on 5/28/2019
Remove and re-install four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front (70%) Rear (70%)
Rich M. gave our service a 5 star review on 5/23/2019
Check charging system for proper output to battery, load test battery, Check all wiring, Inspect belt(s) and adjust as required, Test for current draw on electrical system and record findings.
Remove and replace alternator
Wilma (Willie) C. gave our service a 5 star review on 5/17/2019
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Idaho license plate #1a5y375 provided by customer Vin#1D7HU18N15S162492, 2005 Dodge.
Annie P. gave our service a 5 star review on 4/5/2019
Inspected customers original engine and found #2 cylinder valve broken internal engine parts found in intake manifold, unable to remove necessary to replace with new intake manifold. Inspect engine parts provided when vehicle arrived by tow truck**** Install long block – consists of cylinder block fitted with pistons, rings, connecting rods, crankshaft and bearings, cylinder heads, camshaft, timing chain or belt, gears and sprockets. Includes clean and transfer fuel and electrical assemblies, engine mounts, manifolds, valve covers, oil pan, timing cover, water pump, clutch assembly and flywheel. Adjust idle speed, timing and valves where applicable. *******Adjust labor time to account for engine already being removed, additional time needed to repair wiring, re-install bumper facia and inner bumper (Did not need removed for engine replacement) Sort and inventory parts, Found starter bolt cut needed to extract and install Helicoil. Note**Additional Parts needed not usually replaced with engine bid are marked with ****
Towing
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Inspect hoses an clamps. Pressure test cooling system. Power Flush engine, radiator, and heater core. bring Antifreeze to -35* degrees. Add water pump lubricant and cooling system rust and corrosion protectors. Check thermostat and electric cooling fan operation as applicable.
Evacuate and recharge A/C System, Check Belts/Hoses, Check Vent Temperature and Temperature Controls, Check for leaks, Install A/C Dye (Customer to bring back for black light test)
Chris H. gave our service a 5 star review on 2/16/2019